Page 113 of 122 FirstFirst ... 1363103108111112113114115118 ... LastLast
Results 2,241 to 2,260 of 2429

Thread: Fate/Stay Night [Realta Nua] - Ultimate Edition

  1. #2241
    Quote Originally Posted by onwards View Post
    Well I finished -Fate- and would like to move on to UBW, how would I go about doing that? Because after finishing -Fate-, I don't see an option to go on to UBW.
    If you play through the game again, more choices will appear, which will move you onto the next route.

  2. #2242
    Ah makes sense thanks a lot!

  3. #2243
    Work in progress Vita version.

    If you have any issues, please make a post on this forum thread for the fastest response times.

    This port supports English.

    If you get redirected to this page when running the Vita version, you have made an incorrect installation. In that case, please read the installation steps below (especially step 4).

    Installation:
    1. Prepare the install on a PC using the installer from the first page, or a pre-patched version.
    2. Replace the .xp3 files with the ones in this link inside the "Patches" folder.
    3. Ensure the game works on PC by running "Fate.exe". If that doesn't work, it won't work on Vita either.
    4. Copy the game files to "ux0:/fsnrnue/" so it looks like the following directory tree:
    Code:
    ux0:
    └── fsnrnue
      ├── bgimage.xp3
      ├── bgm.xp3
      ├── data.xp3
      ├── etc.xp3
      ├── fgimage.xp3
      ├── image.xp3
      ├── patch.xp3
      ├── patch_decensor.xp3
      ├── patch_h.xp3
      ├── patch_lang_english.xp3
      ├── patch_op.xp3
      ├── patch_vita_ost.xp3
      ├── rule.xp3
      ├── sound.xp3
      ├── video.xp3
      └── voice.xp3
    5. Download "fate_stay_night_realta_nua_ultimate_edition.vpk" and install using VitaShell.
    6. On the LiveArea, click the installed bubble then click on the blue "Click here to run" text

    How to save:
    To save, you can go into the menu by pressing circle then pressing "Save".

    How to transfer save from PC:
    Set Quality to "Low" and aspect ratio to 4:3.
    Transfer the folder "faterealtanua_savedata" to the "fsnrnue" folder so it looks like this:
    Code:
    ux0:
    └── fsnrnue
      └── faterealtanua_savedata
    Known issues:
    * Sleep mode will cause error
    * Loading times will take a while (around 1m15s for initial start and 40s for scenario load)
    * Rear touchpad is usable
    * Selecting 16:9 mode will cause error
    Last edited by Alyinghood; April 18th, 2021 at 01:14 AM.

  4. #2244
    Hi everyone! This is my first post on this site. Unfortunately the new installer crashes on my pc, after clicking next on the screen where i select the destination folder. Using the 0.9.1 installer works, but using that with the new patches isn't a good solution because the result is a buggy mess, where multiple things don't work as intended. Can someone help me?

  5. #2245
    Quote Originally Posted by Karmondia View Post
    Hi everyone! This is my first post on this site. Unfortunately the new installer crashes on my pc, after clicking next on the screen where i select the destination folder. Using the 0.9.1 installer works, but using that with the new patches isn't a good solution because the result is a buggy mess, where multiple things don't work as intended. Can someone help me?

    Try replacing the .xp3 files with the ones from the following link inside the "Patches" folder.
    http://mega.nz/folder/DMsXCIoD#ubkrOC40vxEJDAslcnScow

  6. #2246
    Quote Originally Posted by Alyinghood View Post
    Try replacing the .xp3 files with the ones from the following link inside the "Patches" folder.
    http://mega.nz/folder/DMsXCIoD#ubkrOC40vxEJDAslcnScow
    So what I have to do is: Install the 0.9.1 version, then replace the xp3 files with the ones in the link?

  7. #2247
    Switch on the Holy Night Quibi's Avatar
    Join Date
    Mar 2012
    Gender
    Male
    Posts
    1,322
    Blog Entries
    1
    Quote Originally Posted by Karmondia View Post
    So what I have to do is: Install the 0.9.1 version, then replace the xp3 files with the ones in the link?
    Yes.

  8. #2248
    Quote Originally Posted by Quibi View Post
    Yes.
    I did what you said, but it's still not perfect. I can't access the engine configuration dialog, movies play with like 4 fps and no sound, and the "force movie playback using mpv" option is greyed out, even though I've moved the mpv.exe to the folder where fate.exe is. What should I do?

  9. #2249
    Quote Originally Posted by Karmondia View Post
    I did what you said, but it's still not perfect. I can't access the engine configuration dialog, movies play with like 4 fps and no sound, and the "force movie playback using mpv" option is greyed out, even though I've moved the mpv.exe to the folder where fate.exe is. What should I do?
    Go to Patch->Options->Save troubleshooting data, upload the resulting zip file to https://ttm.sh/ then post the link here.

  10. #2250
    Here is the link: https://ttm.sh/uFU.zip I also made a video of the issue:

  11. #2251
    Quote Originally Posted by Karmondia View Post
    Here is the link: https://ttm.sh/uFU.zip I also made a video of the issue:
    The "Force movie playback using mpv" being disabled issue has been fixed and will be in the next update.

  12. #2252
    Quote Originally Posted by Alyinghood View Post
    The "Force movie playback using mpv" being disabled issue has been fixed and will be in the next update.
    Thank you!

  13. #2253
    Resident straight-male kuutsundere NM64's Avatar
    Join Date
    Jan 2013
    Location
    Northeast Ohio
    Age
    30
    Posts
    1,957
    I must say though, the part with the OP playing at low single-digit fps is certainly one I've not seen before and is something I would expect with with the likes my old 533MHz Pentium3-based Celeron.

    ...but considering that it's almost certainly using a GPU with h.264 hardware decoding, that would imply to me it's a problem with the hardware decoder and/or its drivers. But I've never heard of a hardware h.264 decoder that couldn't manage 1080p 24fps considering that's what Blu-ray typically uses, so that was pretty much considered the baseline for any and all h.264 hardware decoders back in the late 2000s.
    Beast Lair's resident straight-male kuutsundere
    (because just "tsundere" makes people think of "Shana clones" *shivers*)

    Fate/stay night-related extended music loops @ my YouTube channel

  14. #2254
    Switch on the Holy Night Quibi's Avatar
    Join Date
    Mar 2012
    Gender
    Male
    Posts
    1,322
    Blog Entries
    1
    I've updated the patch (link in signature).
    You can redownload patch.xp3

  15. #2255
    Quote Originally Posted by NM64 View Post
    I must say though, the part with the OP playing at low single-digit fps is certainly one I've not seen before and is something I would expect with with the likes my old 533MHz Pentium3-based Celeron.

    ...but considering that it's almost certainly using a GPU with h.264 hardware decoding, that would imply to me it's a problem with the hardware decoder and/or its drivers. But I've never heard of a hardware h.264 decoder that couldn't manage 1080p 24fps considering that's what Blu-ray typically uses, so that was pretty much considered the baseline for any and all h.264 hardware decoders back in the late 2000s.
    I have a Nvidia GeForce RTX 2070S so I don't think it's hardware related. However, the new patch now allows me to play the movies with mpv, so all is well! It's weird because I have no idea what is causing the problem, again I don't think it's my hardware, because everything else works well with it, and I didn't have any issues with decoding h.264 yet, but it doesn't matter, now that I can use mvp it's fine. Once again, thank you all for helping me!

  16. #2256
    Does anybody know how to get the night-time background files to appear blue like in the game? The extracted png files have a greyish hue. Example: https://imgur.com/a/LOEh1m1

    Don't know if this is the right place to ask this.

  17. #2257
    Quote Originally Posted by Kakarot276 View Post
    Does anybody know how to get the night-time background files to appear blue like in the game? The extracted png files have a greyish hue. Example: https://imgur.com/a/LOEh1m1

    Don't know if this is the right place to ask this.
    Apply a blue filter in Photoshop

  18. #2258
    Quote Originally Posted by Alyinghood View Post
    Apply a blue filter in Photoshop
    Oh, it's really that simple? Now I feel really stupid lol.

  19. #2259
    So I was browsing the gallery when this error happened: https://ttm.sh/ut9.zip The game instructed me to report this here, so here it is.

  20. #2260
    Quote Originally Posted by Karmondia View Post
    So I was browsing the gallery when this error happened: https://ttm.sh/ut9.zip The game instructed me to report this here, so here it is.
    Here's a video about the error: It's not the biggest thing, but I'm trying to be helpful

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •